Sign Frames

We have several sign framing solutions, all of which can be supplied as complete kits or DIY lengths & components.

Complete Kits mean you get exactly what you order with all the fixings required and have no waste. Kits are ideal if you have no fabrication facilities or where your requirements are occasional & varied, so that you don’t need to store all the variations or have money tied up in slow moving stock.

DIY Lengths & Components are ideal if you have a higher demand for one type & colour and have a workshop with a good quality chop saw with an aluminium cutting blade & are prepared to carry stock.

PanelTrim is the UK's most popular range of aluminium extrusions, designed to mount & frame rigid panels to walls without any fixings going through the panel face. There are four sizes/styles to accommodate the smallest to the largest of signs. Stock colours are black, white or silver, or we can paint or powder coat them to any colour.

The advantages are: -

• No fixings through the sign.
• The panels are not fixed so don’t ‘cockle’ or flex in the heat.
• The widest choice of quality sign framing options in the UK.

FlexiFace PanelTrim frames are very similar to PanelTrim but designed to have a flexible PVC printed panel instead of a rigid panel. The PVC panel (often called a ‘skin’) is simply printable banner material that requires no taping or stitching & is held into the aluminium frame with a decorative plastic trim all around the frame. Stock colours of the frame are white or silver, or we can paint or powder coat them to any colour, and the plastic clip trim is either black or white.

The advantages are: -

• No joints in the panel for the wind to get behind.
• Lighter than rigid panels.
• Graphics are cheaper to produce and transport.

Traditional Double Sided Sign Frames are designed to compliment our range of Projecting Sign Brackets. Historically these signs would have a hardwood frame which are expensive to produce in the first place & requires constant maintenance (painting). This prompted us to design and produce our own aluminium extrusion framing system. It is designed to frame a 10mm thick double-sided panel, or two ACM or aluminium panels.

Stock colours of this frame is black or white, or we can paint or powder coat it to any RAL colour.

The advantages are: -

• Quicker and cheaper to produce than traditional timber frames.
• Liked by Planning Departments around the country.
• Can be used in a wide variety applications.

Aluminium Capping is a simple finishing extrusion designed to frame a 19mm thick panel which can be used on single or double-sided signs. It is available in anodised silver or raw ‘mill finish’, or we can paint or powder coat it to any RAL colour.