Cable Stay Kit
£30.23
ex VAT (each)
Have this product with its options and price emailed to you as a quote.
Cable Stay Kit
Helps to take the weight of a large or heavy panel.
- Once your bracket has been fitted to the wall, mark out & then drill two 6mm diameter holes, 65mm deep into the wall & screw in the eyebolt with the cable attached into one hole, and the individual eyebolt in the other. (Ideally, these eyebolt holes should be about a bracket arm’s length above and the same distance on either side of the centerline)
- Fit a cable thimble to the loop on the bracket arm & close it up.
- Feed the cable around the cable thimble on the bracket arm and then back to the wall and through the eyebolt and back on itself.
- Fit one cable clamp loosely on the cable by the bracket arm and the other at the wall end of the cable.
- Pull the cable tight & then do both the clamps up tight, making sure not to pull the bracket arm out of ‘true’
- Cut away any excess cable.|