PULLEY Wall Mounted Flat to the Wall 122cm Banner Pole Kit

STANDARD TENSION KIT

These three part galvanised springs have limiter bars that allow them to 'stretch' up to a point, but preventing it from going further & becoming damaged (and losing it's spring)

We have them specifically made for our Banner Pole Kits to keep the banners taut whilst allowing them to be blown & spill the wind, which in turn prolongs the banner's life because it's not being battered.

• Length without tension 120mm
• Length at full stretch 170mm
• Includes 2 springs  & 2 quick links per pack

HEAVY DUTY TENSION KIT

• Length without tension 210mm
• Length at full stretch 310mm
• Includes 2 springs  & 2 quick links per pack

Artwork

Please select the option above and upload your artwork file (or email it separately to studio@tradesignz.com quoting the order number)

Please pay careful attention to the following guidelines:

We pride ourselves in offering a high quality and fast turnaround service but we can only do this if you provide artwork files in accordance with the guidelines below.

Failure to follow these guidelines will almost certainly delay your order and/or incur extra costs.

The prices shown are for your artwork to be supplied in a "ready to print" format.

We accept artwork files from various programmes as detailed below.

Supplying us with correct, ready to print artwork is your responsibility. Please check your artwork carefully before submitting it to us as we cannot be held responsible for print errors or delays where artwork has been supplied incorrectly. 

File Formats

We require artwork to be supplied in the following formats:

.ai  When supplying artwork in this format, please ensure that all fonts are outlined and any images are embedded or supplied as separate image files.

.eps  When supplying artwork in this format, please ensure that all fonts are outlined and any images are embedded or supplied as separate image files.

.tiff  Please supply tiff files at 300dpi.

.jpg  Please supply as un-compressed jpg at 300dpi.

.pdf  Print ready artwork- please ensure this includes the appropriate bleed and crop marks.

Some file formats can be more suitable for certain types of work, please feel free to give a member of our design team a call if you are unsure or have any questions.

Colours

Our print machines are CMYK based (Cyan, Magenta, Yellow and Black). Our rip software will automatically convert any pantone colours to CMYK. If you have any specific pantone references that need to be matched, please do mention this to a member of our sales team when placing your order.

Fonts

All fonts should be outlined. Providing a pdf or hard copy of the artwork would be beneficial to ensure any text is reproduced correctly.

Sending Artwork

Artwork can be uploaded using the 'graphics upload' option before adding you item to the basket. If your artwork file size is larger than 10MB, commercial websites such as Mail Big File, We Transfer or drop-boxes are the best way of getting the files to us. If you have any questions or require any assistance with file types or artwork resolution, please do not hesitate to give us a call on 01524 841726 or email us at studio@tradesignz.com.