Projecting Wall Mounted 60cm Banner Pole kit

  • 60cm Wall Mount Banner Pole Kit
  • These kits are for mounting vertical double sided banners to walls.
  • Zinc'd & Powder Coated for maximum durability
  • Takes a 610mm wide banner x up to 2.6mts
  • Drawbar 'limited stretch' tensioners
  • Black or white available

more info...

£164.36 ex VAT (each)

Compatible file extensions to upload: ai, eps, tiff, jpeg, pdf

Have this product with its options and price emailed to you as a quote.

Template for double sided printed bannersThese kits are for mounting vertical double sided banners to walls.

  • Zinc'd & Powder Coated for maximum durability
  • Takes a 610mm wide banner x up to 2.6mts
  • Drawbar 'limited stretch' tensioners
  • Black or white available
  • Uplighter/Downlighter Kits available

Kit includes:-

  • 2 Main Support poles
  • 2 tensioner bars
  • 2 quicklinks
  • 2 drawbar Spring Tensioners
  • 6 Ankerbolt fixings*

 * Fixings are supplied for convenience & does not imply suitability. It is the fixers responsibility to asses fitness for purpose.


Frequently asked questions ?


Q How do I prepare Artwork for a double sided printed banner ?

A Click here for our Artwork Template.


Q What file formats can we supply to print our banner ?

A Click here for artwork instructions and acceptable file formats.


Q How do I fix my banner to the wall ?

A Click here for fitting instructions.


Ject 1-85 projection bracket drawing


These three part galvanised springs have limiter bars that allow them to 'stretch' up to a point, but preventing it from going further & becoming damaged (and losing it's spring)

We have them specifically made for our Banner Pole Kits to keep the banners taut whilst allowing them to be blown & spill the wind, which in turn prolongs the banner's life because it's not being battered.

  • Length without tension 120mm
  • Length at full stretch 170mm
  • Quantity:- Two springs  & 2 Quick LInks per pack.

Small Tension Spring





  • Length without tension 210mm
  • Length at full stretch 310mm
  • Quantity:- Two springs & 2 Quick Links per pack.

 large rension spring


Ideal if you have a longer banner, a very windy location or the wall condition is rather suspect, the kit contains two sets of 6mm stainless steel cable and the wall eyes & fittings to further stabalize the main Banner Poles.

cable stay kit 

1. Once your banner poles have been fitted to the wall, mark out & then drill two 6mm diameter holes, 65mm deep into the wall & screw in the eyebolt with the cable attached into one hole, and the individual eyebolt in the other. (Ideally, these eyebolt holes should be about a banner pole’s length above and the same distance on either side of the centerline)

2. Fit a cable thimble to the loop on the top banner pole & close it up.

3. Feed the cable around the cable thimble on the banner pole and then back to the wall and through the eyebolt and back on itself.

4. Fit one cable clamp loosely on the cable by the banner pole and the other at the wall end of the cable.

5. Pull the cable tight & then do both the clamps up tight, making sure not to pull the bracket arm out

of ‘true’

6. Cut away any excess cable.

7. Repeat steps 1 – 6 for the other banner arm.


We can apply digitally printed direct from your file. Please select the option above and attach your artwork file at the checkout (or email it separately to quoting the order number)

Please pay careful attention to the following guidelines:

We pride ourselves in offering a high quality and fast turnaround service but we can only do this if you provide artwork files in accordance with the guidelines below.

Failure to follow these guidelines will almost certainly delay your order and/or incur extra costs.

The prices shown are for your artwork to be supplied in a "ready to print" format.

We accept artwork files from various Windows programmes as detailed below. However, for each file/program type please note the format requirements: compression should be turned off.

Supplying us with correct, ready to print artwork is your responsibility. Please check your artwork carefully before submitting it to us as we cannot be held responsible for print errors or delays where artwork has been supplied incorrectly. 

File Formats

We require artwork to be supplied in the following formats:

.ai:     When supplying artwork in this format, please ensure that all fonts are outlined and any images are embedded or supplied as separate image files.

.eps:  When supplying artwork in this format, please ensure that all fonts are outlined and any images are embedded or supplied as separate image files.

.tiff:    Please supply tiffs following our guidelines on suitable image resolutions (dpi) below.

.jpeg: Please supply as un-compressed jpeg following our guidelines on suitable image resolutions (dpi) below.

.pdf:   Print ready artwork- please ensure this includes the appropriate bleed and crop marks and adheres to our guidelines on image resolution (dpi) below.

Some file formats can be more suitable for certain types of work, please feel free to give a member of our design team a call if you are unsure or have any questions.


Our print machines are CMYK based (Cyan, Magenta, Yellow and Black). Our rip software will automatically convert any Pantone colours to CMYK. If you have any specific Pantone references that need to be matched, please do mention this to a member of our sales team when placing your order.

Image Resolution

When supplying rasterised artwork, i.e, eps, tiff, jpg, or print ready .pdf files, please ensure that the resolution (dpi) is set as below, these are absolute minimums. If file size allows then 300 dpi is optimum:

  •          Full scale (100%) - 72 dpi
  •          Half scale (50%) - 150 dpi
  •         Quarter scale (25%) - 300 dpi
  •         10 % Scale (for use with large format artwork) - 750dpi


All fonts should be supplied with artwork in a separate folder, labelled accordingly. Where possible, fonts should be outlined. On occasions text can re-flow so providing a pdf or hard copy of the artwork would be beneficial.

Sending Artwork

If the file size is less than 10 Mb then please use regular email. For larger artwork files, commercial websites such as Mail Big File, We Transfer or drop-boxes are the best way of getting the files to us.


If you have any questions or require any assistance with file types or artwork resolution, please do not hesitate to give us a call on 01524 841726 or email us at

You can add 2 or 4 LED Floodlights to this Banner Pole Kit.

Each lighting kit includes 2 off 10watt LED floodlights and a mounting bracket which will fit to either the top or bottom pole.

A single lighting kit should be sufficient for banners up to 1.5metres long, but for longer banners we would suggest 2 lighting kits as both up & down lighting arrangement.


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Shipping costs

  • Delivery charges vary based on the product, size and delivery address.
  • Estimated delivery charges for this item.
    Mainland UK and Scottish Mainland - £0.00
    Grampions - £17.25
    Isle of Wight - £21.55
    Scottish and other Islands - £40.99
    Scottish Highlands - £30.55
    Northern Ireland - £40.99
  • For an accurate delivery charge, please enter the delivery postcode in the cart or at the checkout.

Shipping processing time

  • All orders for stock items are generally processed within 1-2 days working days.
  • Orders for special colours or more bespoke items will take longer. We usually have these processed within 10 days working days, but it may take longer depending on the specifications.
  • If you have a particular delivery deadline, please call the office on 01524 841726 to discuss your needs.
  • If we are experiencing a high volume of orders, shipments may be delayed. Please allow additional time for your delivery. If there will be a significant delay in any shipment of your order, we will contact you via email or telephone.

Shipment Confirmation & Order Tracking

  • As soon as your order is packed & ready for the courier, we will email your invoice with the Carrier & Tracking Information.


  • All deliveries must be examined - before being signed for.
  • Any damage or shortage must be noted with your signature and to us within 24 hours, otherwise the carriers will deny responsibility, and we will be unable to make a claim on your behalf. 
Copyright © 2021-present Tradesignz Manufacturing Ltd. All rights reserved.